Quiz on Virtual LAN Part-4

Chapter:Inter VLAN routing

Click on the correct answer for each question.

No negative marking and no time limit.

At the end check the score and correct your answer.

• 1. Strike out the wrong statement related to router on a stick

  
  A) It divides the physical interface into multiple virtual interfaces
  
  B) Each sub interface carries the frame of specific VLAN
  
  C) Tagging may be done with Dot1Q or the Cisco proprietary ISL standard
  
  D)Cisco router only supports ISL frames
  
  

• 2. By default all the switchports of a switch are in _______.

  
  A) disabled mode
  
  B) Aceess mode
  
  C) trunk mode
  
  D) hybrid mode
  
  

• 3. If you create four sub-interfaces in an router Gig interface, you have to run 'no shut' command in _____

  
  A) four interfaces
  
  B) only one interface
  
  C) five interfaces
  
  D) sub-interface are already in ON state
  
  

• 4. You have an internal network in four floors with eight diffetrent VLANs, what device will you suggest for inter VLAN communication?

  
  A) A router
  
  B) A managed switch
  
  C) An L-3 Switch
  
  D) A UTM
  
  

• 5. The command in a Layer-3 switch to allow inter VLAN routing is ____________

  
  A) alllow inter vlan routing
  
  B) ip routing
  
  C) inter vlan routing
  
  D) allow ip routing
  
  

• 6. A native VLAN to a trunk port means __________________

  
  A) The trunk will carry tagged frames from all allowed VLANs and the untagged frames of that VLAN
  
  B) The trunk port will carry frames of only that VLAN
  
  C) The trunk port will carry all but that VLAN
  
  D) The trunk port will assign high priority for the tagged frame of that VLAN
  
  

• 7. Command syntax to create a new sub-interface is

  
  A) create sub-interface
  
  B) create new sub-interface
  
  C) interface interfce_name.sub_inteface
  
  D) create inteface interface_name.sub_interface
  
  

• 8. By default a trunk port of a switch will _________

  
  A) transport all active VLANs
  
  B) transport only the native VLAN
  
  C) transport no VLAN, each VLAN is to be added to the list
  
  D) it will block all taggd frames
  
  

• 9. To show all switch-ports status with the IP address, we run the command _____________

  
  A) show all ip interfaces
  
  B) show ip interfaces br
  
  C) show all switchports
  
  D) show all ip switchports
  
  

• 10. To allow VLAN 10 in a sub-interface you should run the command in sub-if config mode

  
  A) alllow vlan 10
  
  B) encapsulation dot1q 10
  
  C) encapsulation dot1q allowed vlan add 10
  
  D) allow vlan 10 encapsulation dot1q
  
  

Click on the correct answer for each question.

No negative marking and no time limit.